Motorcycles are a lot of fun to ride, but they can be a pain to wash. Unless you know what you’re doing, it’s easy to damage your bike while trying to clean it. 

In this article, we will walk you through the process of washing your motorcycle safely and effectively. So read on and learn how to keep your motorcycle looking great!

  1. Choose a place to wash your motorcycle 

One of the most important parts of keeping your motorcycle in good condition is washing it regularly. However, simply taking it to the nearest car wash is not always the best option. When choosing a place to wash your motorcycle, there are a few things you should keep in mind. 

First, you need to make sure that the area is large enough to accommodate your motorcycle. You also want to make sure that the hose will reach all parts of your bike, and that there is a drain nearby so that the water can run off easily. You need to ensure that the surface is smooth and level, so that your bike doesn’t tip over while you’re washing it. 

It’s also a good idea to place your motorcycle on a lift so that you can easily clean the underside. 

  1. Gather your cleaning supplies

To clean your motorcycle effectively, you will need a few supplies. First, you will need a mild soap or detergent that is designed for use on vehicles —specifically motorcycles if possible. 

You will also need a soft brush to help loosen stubborn dirt and grime. In addition, you will need a hose with a steady stream of water to rinse the bike off. 

Finally, you will need a clean cloth or towel to dry the motorcycle after it has been washed. With these supplies on hand, you can keep your motorcycle looking great all season long.

  1. Never wash immediately after riding

Motorcycles are a lot of fun to ride, but they also require some special care. One thing that many riders don’t realize is that you should never wash your motorcycle right after riding it. 

The reason for this is that the heat from the engine can cause the water to evaporate quickly, leaving behind streaks and spots. In addition, the water can also cause the grease and grime from the road to become trapped in the paint, making it difficult to remove. 

If you must wash your motorcycle right after riding it, be sure to rinse it thoroughly with cold water to cool those hot engine parts down to a manageable temperature. 

  1. Give your bike a thorough rinse

Before you start scrubbing your motorcycle with soap, it’s important to give it a thorough rinse. This will help remove any loose dirt and grime that could scratch your bike’s paint job when you wash it. 

To rinse your motorcycle properly, start by wetting it down with a hose. Make sure to get the underside of the bike as well as the wheels and tires. Once the motorcycle is wet, use a soft brush to loosen any stubborn dirt. 

  1. Start washing from the top 

Once you’ve rinsed your motorcycle, it’s time to start washing it with soap. Be sure to use a mild soap or detergent that is designed for use on vehicles. Start by washing the upper part of the motorcycle, including the gas tank, seat, and handlebars. 

Use a soft brush to loosen any dirt that is stuck on these surfaces. We recommend using a soft brush because you don’t want to damage that beautiful paint job! Once you’ve scrubbed the upper part of the bike, rinse it off with clean water.

  1. Wipe dry with a cloth or towel

After you’ve rinsed the soap off of your motorcycle, it’s important to dry it with a clean cloth or towel. This will help prevent water spots from forming on the surface. 

Be sure to dry the bike thoroughly, paying special attention to any crevices where water could pool. Once the motorcycle is dry, you can optionally move on to waxing for an extra shiny finish. 

  1. Lubricate your motorcycle chain

One final and crucial step in washing your motorcycle is to lubricate the chain. Failing to maintain your chain can lead to serious engine troubles which could put you in harm’s way on the road.

Luckily, you can always reach out to the Los Angeles motorcycle accident attorneys in a worst-case scenario. Regularly lubricating your motorcycle chain will help keep it from wearing out or rusting, and will make it last longer. 

To lubricate the chain, simply apply a small amount of chain lube to the surface. Be sure to wipe off any excess lube so that it doesn’t attract dirt and grime.


By following these simple tips, you can keep your motorcycle looking great all season long. With a little bit of care and attention, you can enjoy many years of happy riding.